Environmental Stability Research Articles

Enhanced Charge Transfer in Quasi-2D Perovskite by Formamidinium Cation Gradient Incorporation for Efficient and Stable Solar Cells.

Quasi-2D perovskites have attracted much attention in perovskite photovoltaics due to their excellent stability. However, their photoelectric conversion efficiency (PCE) still lags 3D counterparts, particularly with high short-circuit current (JSC) loss. The quantum confinement effect is pointed out to be the sole reason, which introduces widened bandgap and poor exciton dissociation, and undermines the light capture and charge transport. Here, the gradient incorporation of formamidinium (FA) cations into quasi-2D perovskite is proposed to address this issue. It is observed that FA prefers to incorporate into the larger n value phases near the film surface compared to the smaller n value phases in the bulk, resulting in a narrow bandgap and gradient structure within the film. Through charge dynamic analysis using in situ light-dark Kelvin probe force microscopy and transient absorption spectroscopy, it is demonstrated that incorporating 10% FA significantly facilitates efficient charge transfer between low n-value phases in the bulk and high n-value nearby film surface, leading to reduced charge accumulation. Ultimately, the device based on (AA)2(MA0.9FA0.1)4Pb5I16, where AA represents n-amylamine renowned for its exceptional environmental stability as a bulky organic ligand, achieves an impressive power conversion efficiency (PCE) of 18.58% and demonstrates enhanced illumination and thermal stability.

Genotype by environment interaction and stability analysis of three agronomic traits in Kersting's groundnut (Macrotyloma geocarpum) using factor analytic modeling and environmental covariates

AbstractUnderstanding genotype by environment interaction (GEI) represents a challenge in Kersting's groundnut [Macrotyloma geocarpum (Harms) Maréchal and Baudet] breeding for selecting high‐performing and stable lines across environments. Here, we investigated GEI and stability in Kersting's groundnut using factor analytic (FA) based linear mixed models and environmental covariates. A total of 375 accessions were evaluated across 3 years (2017, 2018, and 2019) and two locations (Sékou and Savè) in Benin, generating five environments (E1, E2, E3, E4, and E5). The traits measured included days to 50% flowering (DFF), grain yield (YLD), and 100‐seed weight (HSW). The study generated multi‐environment values for grain yield and its components in Kersting's groundnut. The genetic correlations between pairs of environments ranged from −0.71 to 0.99. The genetic correlations between YLD and HSW indicated positive and moderate to high correlations in all environments. The FA analysis revealed that FA2 structure accounted for 93.9% of the genetic variability in DFF with factor 1 accounting for more than 90% of the environments variations. Two factors explained 87% of the genetic variance in grain yield, and 70% of the environments variability were clustered by factor 1. For HSW, two factors explained 85% of the genetic variance of the environments, and factor 1 accounted for 72.7%. Combining environmental covariates to FA models revealed that precipitation, temperature, and growth cycle duration were highly correlated to the environmental loadings of factor 1. Relative humidity and solar radiation showed moderate to high correlations with factor 2 loadings. Those covariates explained the high GEI among environments clustered by a given factor. Precipitations and temperatures affected the variations in grain yield. Finally, based on latent regression analysis, the accessions AF202, AF221, AF223, AF225, and AF256 were identified as accessions combining best performance for grain yield, early flowering, and 100‐seed weight, showing adaptability across environments and stability to some environments.

Managing Interfacial Defects and Charge-Carriers Dynamics by a Cesium-Doped SnO2 for Air Stable Perovskite Solar Cells.

A high-quality nanostructured tin oxide (SnO2) has garnered massive attention as an electron transport layer (ETL) for efficient perovskite solar cells (PSCs). SnO2 is considered the most effective alternative to titanium oxide (TiO2) as ETL because of its low-temperature processing and promising optical and electrical characteristics. However, some essential modifications are still required to further improve the intrinsic characteristics of SnO2, such as mismatch band alignments, charge extraction, transportation, conductivity, and interfacial recombination losses. Herein, an inorganic-based cesium (Cs) dopant is used to modify the SnO2 ETL and to investigate the impact of Cs-dopant in curing interfacial defects, charge-carrier dynamics, and improving the optoelectronic characteristics of PSCs. The incorporation of Cs contents efficiently improves the perovskite film quality by enhancing the transparency, crystallinity, grain size, and light absorption and reduces the defect states and trap densities, resulting in an improved power conversion efficiency (PCE) of ≈22.1% with Cs:SnO2 ETL, in-contrast to pristine SnO2-based PSCs (20.23%). Moreover, the Cs-modified SnO2-based PSCs exhibit remarkable environmental stability in a relatively higher relative humidity environment (>65%) and without encapsulation. Therefore, this work suggests that Cs-doped SnO2 is a highly favorable electron extraction material for preparing highly efficient and air-stable planar PSCs.

Impact of Relational Coordination on Job Satisfaction and Willingness to Stay: A Cross-Sectional Survey of Healthcare Professionals in South Tyrol, Italy

Job satisfaction and willingness to stay are critical for workforce stability in a challenging healthcare environment. This study examined how relational coordination, a key factor in teamwork and communication, influences outcomes among healthcare professionals in a bilingual, culturally mixed region of Italy. This cross-sectional survey included general practitioners, hospital physicians, nurses, and administrators from the South Tyrol Health Service, using the ‘Relational Coordination Survey’ and additional measures of job satisfaction and willingness to stay. The analytical methods used included descriptive statistics, correlations, and regression analyses. This study applied path analysis, including mediation and moderation techniques, to investigate the roles of relational coordination and job satisfaction in influencing the willingness to stay. It employs Conditional Process Analysis with the PROCESS macro in SPSS, focusing on models for moderated mediation analysis. The results indicated a critical influence of relational coordination on both job satisfaction and willingness to stay among the 525 healthcare professionals. Job satisfaction varied by health district and years of service, with midcareer professionals being the least satisfied. The findings highlight the central role of relational coordination in job satisfaction and willingness to stay and confirm that low job satisfaction increases turnover intentions. Relational coordination directly enhanced job satisfaction and willingness to stay, while also serving as a mediating factor that amplifies the impact of job satisfaction on retention intentions. This study reinforces the need for strong teamwork and communication to stabilize the healthcare workforce. Targeted interventions aimed at improving relational coordination could significantly enhance job satisfaction and retention among healthcare professionals, particularly in culturally diverse settings such as South Tyrol.

Genotype × environment interactions and stability analysis for grain yield in pearl millet [Pennisetum glaucum (L.) R. BR.

Genotype × environment interactions and stability analysis for grain yield in pearl millet [Pennisetum glaucum (L.) R. BR.

Designed Additive to Regulated Crystallization for High Performance Perovskite Solar Cell

It is a crucial role for enhancing the power conversion efficiency (PCE) of perovskite solar cells (PSCs) to prepare high‐quality perovskite films, which can be achieved by delaying the crystallization of perovskite film. Hence, we designed difluoroacetic anhydride (DFA) as an additive to regulating crystallization process thus reducing defect formation during perovskite film formation. It was found DFA reacts with DMSO by forming two molecules, difluoroacetate thioether ester (DTE) and difluoroacetic acid (DA). The strong bonding DTE·PbI2 and DA·PbI2 retard perovskite crystallization process for high‐quality film formation, which was monitored through in situ UV‐vis and PL tests. By using DFA additives, we prepared perovskite films with high‐quality and low defects. Finally, a champion PCE of 25.28% was achieved with excellent environmental stability, which retained 95.75% of the initial PCE after 1152 h at 25 °C under 25% RH.

Novel Environmentally Friendly RNAi Biopesticides: Targeting V-ATPase in Holotrichia parallela Larvae Using Layered Double Hydroxide Nanocomplexes.

RNA interference (RNAi)-based biopesticides offer an attractive avenue for pest control. Previous studies revealed high RNAi sensitivity in Holotrichia parallela larvae, showcasing its potential for grub control. In this study, we aimed to develop an environmentally friendly RNAi method for H. parallela larvae. The double-stranded RNA (dsRNA) of the V-ATPase-a gene (HpVAA) was loaded onto layered double hydroxide (LDH). The dsRNA/LDH nanocomplex exhibited increased environmental stability, and we investigated the absorption rate and permeability of dsRNA-nanoparticle complexes and explored the RNAi controlling effect. Silencing the HpVAA gene was found to darken the epidermis of H. parallela larvae, with growth cessation or death or mortality, disrupting the epidermis and midgut structure. Quantitative reverse transcription-polymerase chain reaction and confocal microscopy confirmed the effective absorption of the dsRNA/LDH nanocomplex by peanut plants, with distribution in roots, stems, and leaves. Nanomaterial-mediated RNAi silenced the target genes, leading to the death of pests. Therefore, these findings indicate the successful application of the nanomaterial-mediated RNAi system for underground pests, thus establishing a theoretical foundation for developing a green, safe, and efficient pest control strategy.

Designed Additive to Regulated Crystallization for High Performance Perovskite Solar Cell.

It is a crucial role for enhancing the power conversion efficiency (PCE) of perovskite solar cells (PSCs) to prepare high-quality perovskite films, which can be achieved by delaying the crystallization of perovskite film. Hence, we designed difluoroacetic anhydride (DFA) as an additive to regulating crystallization process thus reducing defect formation during perovskite film formation. It was found DFA reacts with DMSO by forming two molecules, difluoroacetate thioether ester (DTE) and difluoroacetic acid (DA). The strong bonding DTE·PbI2 and DA·PbI2 retard perovskite crystallization process for high-quality film formation, which was monitored through in situ UV-vis and PL tests. By using DFA additives, we prepared perovskite films with high-quality and low defects. Finally, a champion PCE of 25.28% was achieved with excellent environmental stability, which retained 95.75% of the initial PCE after 1152 h at 25 °C under 25% RH.

Anti-Oxidized Self-Assembly of Multilayered F-Mene/MXene/TPU Composite with Improved Environmental Stability and Pressure Sensing Performances

MXenes, as emerging 2D sensing materials for next-generation electronics, have attracted tremendous attention owing to their extraordinary electrical conductivity, mechanical strength, and flexibility. However, challenges remain due to the weak stability in the oxygen environment and nonnegligible aggregation of layered MXenes, which severely affect the durability and sensing performances of the corresponding MXene-based pressure sensors, respectively. Here, in this work, we propose an easy-to-fabricate self-assembly strategy to prepare multilayered MXene composite films, where the first layer MXene is hydrogen-bond self-assembled on the electrospun thermoplastic urethane (TPU) fibers surface and the anti-oxidized functionalized-MXene (f-MXene) is subsequently adhered on the MXene layer by spontaneous electrostatic attraction. Remarkably, the f-MXene surface is functionalized with silanization reagents to form a hydrophobic protective layer, thus preventing the oxidation of the MXene-based pressure sensor during service. Simultaneously, the electrostatic self-assembled MXene and f-MXene successfully avoid the invalid stacking of MXene, leading to an improved pressure sensitivity. Moreover, the adopted electrospinning method can facilitate cyclic self-assembly and the formation of a hierarchical micro-nano porous structure of the multilayered f-MXene/MXene/TPU (M-fM2T) composite. The gradient pores can generate changes in the conductive pathways within a wide loading range, broadening the pressure detection range of the as-proposed multilayered f-MXene/MXene/TPU piezoresistive sensor (M-fM2TPS). Experimentally, these novel features endow our M-fM2TPS with an outstanding maximum sensitivity of 40.31 kPa−1 and an extensive sensing range of up to 120 kPa. Additionally, our M-fM2TPS exhibits excellent anti-oxidized properties for environmental stability and mechanical reliability for long-term use, which shows only ~0.8% fractional resistance changes after being placed in a natural environment for over 30 days and provides a reproducible loading–unloading pressure measurement for more than 1000 cycles. As a proof of concept, the M-fM2TPS is deployed to monitor human movements and radial artery pulse. Our anti-oxidized self-assembly strategy of multilayered MXene is expected to guide the future investigation of MXene-based advanced sensors with commercial values.

Two-dimensional Hybrid Perovskites: from Static and Dynamic Structures to Potential Applications.

Two-dimensional (2D) perovskites have received great attention recently due to their structural tunability and environmental stability, making them highly promising candidates for various applications by breaking property bottlenecks that affect established materials. However, in 2D perovskites, the complicated interplay between organic spacers and inorganic slabs makes structural analysis challenging to interpret. A deeper understanding of the structure-property relationship in these systems is urgently needed to enable high-performance tunable optoelectronic devices. Herein, we examine how structural changes, from constant lattice distortion and variable structural evolution, modeled with both static and dynamic structural descriptors, affect macroscopic properties and ultimately device performance. We report the effect of chemical composition, crystallographic inhomogeneity, and mechanical-stress-induced static structural changes and corresponding electronic band variations. Additionally, the structure dynamics are described from the viewpoint of anharmonic vibrations, which impact electron-phonon coupling and the carriers' dynamic processes. Correlated carrier-matter interactions, known as polarons and acting on fine electronic structures, are then discussed. Finally, we propose reliable guidelines to facilitate design to exploit structural features and rationally achieve breakthroughs in 2D perovskite applications. This review provides a global structural landscape of 2D perovskites, expected to promote the prosperity of these materials in emerging device applications. This article is protected by copyright. All rights reserved.

Robust Flexible Electret Tactile Sensor for Identification on Mushy Material in Harsh Environment

AbstractIn traditional food industry, the assessment of mushy materials plays an important role in high‐quality food production, which still relies heavily on human tactile perception. In this work, to address this issue for enhancing food production efficiency, a flexible electret tactile sensor that can mimic expert touch is developed. The sensor consists of a pair of electrodes, a microstructural spacer, and a pre‐charged electret. Benefiting from the electrostatic induction‐based working mechanism, the sensor attains high sensitivity and is ideal for precise sensing in actions similar to those of skilled Baijiu distillers. Due to its hermetic and electromagnetic interference‐resistant encapsulation with polypropylene/aluminum/parylene films, the sensor remained durable in vinasse in the real distillery, with its high water and alcohol content, for over 21 days. This demonstrates its long‐term stability in harsh environment. Based on the proposed flexible electret tactile sensor, an automated and intelligent vinasse identification system is built, mimicking the actions of Baijiu distillers in vinasse assessment. Combining tactile sensing data with machine learning, the system can distinguish 8 kinds of vinasses with different ingredient ratios, achieving an accuracy of 98%. This work significantly demonstrates the practical potential of the sensor in the food industry.

Understanding service ecosystem dynamics: a typology

PurposeThe service environment is becoming increasingly turbulent, leading to calls for a systemic understanding of it as a set of dynamic service ecosystems. This paper advances this understanding by developing a typology of service ecosystem dynamics that explains the varying interplay between change and stability within the service environment through distinct behavioral patterns exhibited by service ecosystems over time.Design/methodology/approachThis study builds upon a systematic literature review of service ecosystems literature and uses system dynamics as a method theory to abductively analyze extant literature and develop a typology of service ecosystem dynamics.FindingsThe paper identifies three types of service ecosystem dynamics—behavioral patterns of service ecosystems—and explains how they unfold through self-adjustment processes and changes within different systemic leverage points. The typology of service ecosystem dynamics consists of (1) reproduction (i.e. stable behavioral pattern), (2) reconfiguration (i.e. unstable behavioral pattern) and (3) transition (i.e. disrupting, shifting behavioral pattern).Practical implicationsThe typology enables practitioners to gain a deeper understanding of their service environment by discerning the behavioral patterns exhibited by the constituent service ecosystems. This, in turn, supports them in devising more effective strategies for navigating through it.Originality/valueThe paper provides a precise definition of service ecosystem dynamics and shows how the identified three types of dynamics can be used as a lens to empirically examine change and stability in the service environment. It also offers a set of research directions for tackling service research challenges.

Neanderthal resilience and adaptability: insights from the Abric Pizarro faunal assemblage during the MIS 4

The examination of faunal assemblages through zooarchaeological analyses constitutes a fundamental approach for gaining insight into the intricate behaviours of Neanderthals. Previous investigations have primarily focused on periods of relative environmental stability, and this has provided a wealth of relevant archaeological data. However, our understanding of Neanderthal resilience during the MIS 4, a period presumably characterised by harsh environmental conditions, remains limited. This study presents the first comprehensive analysis of the faunal assemblages from Levels M and P at Abric Pizarro. The geographic location of Abric Pizarro in the southeast Pre-Pyrenees, combined with chronometric dating, offers a unique opportunity to explore Neanderthal behaviours during a poorly known chronological period. The detailed zooarchaeological analysis comprised taxonomic identification, taphonomic analysis and age-at-death profiling to explore the adaptability and flexibility in the Neanderthal diet. The findings indicate that Neanderthal groups incorporated a diverse range of protein resources from small herbivores (e.g., caprids) to very large herbivores (e.g., Bos/Bison). These results not only demonstrate an adaptability to changing environments in an area traditionally deemed unsuitable for long-term occupation, but also contributes significantly to our understanding of the complex behaviours exhibited by Neanderthals.

Environmental Stability of Actinide Oxides Mapped by Integrated and Accurate First-Principles Calculations

Environmental Stability of Actinide Oxides Mapped by Integrated and Accurate First-Principles Calculations

MzmL, a novel marine derived N-acyl homoserine lactonase from Mesoflavibacter zeaxanthinifaciens that attenuates Pectobacterium carotovorum subsp. carotovorum virulence

Quorum sensing (QS) is a conserved cell–cell communication mechanism widely distributed in bacteria, and is oftentimes tightly correlated with pathogen virulence. Quorum quenching enzymes, which interfere with QS through degrading the QS signaling molecules, could attenuate virulence instead of killing the pathogens, and thus are less likely to induce drug resistance. Many Gram-negative bacteria produce N-acyl homoserine lactones (AHLs) for interspecies communication. In this study, we isolated and identified a bacterial strain, Mesoflavibacter zeaxanthinifaciens XY-85, from an Onchidium sp. collected from the intertidal zone of Dapeng Reserve in Shenzhen, China, and found it had strong AHL degradative activity. Whole genome sequencing and blast analysis revealed that XY-85 harbors an AHL lactonase (designated MzmL), which is predicted to have an N-terminal signal peptide and share the “HXHXDH” motif with known AHL lactonases belonging to the Metallo-β-lactamase superfamily. Phylogenetic studies showed MzmL was closest to marine lactonase cluster members, MomL and Aii20J, instead of the AiiA type lactonases. Ultra performance liquid chromatography-mass spectrometry analysis confirmed that MzmL functions as an AHL lactonase catalyzing AHL degradation through lactone hydrolysis. MzmL could degrade both short- and long-chain AHLs with or without a substitution of oxo-group at the C-3 position, and retained full bioactivity under a wide range of temperatures (28–100°C) and pHs (4–11). Furthermore, MzmL significantly reduced Pectobacterium carotovorum subsp. carotovorum virulence factor production in vitro, such as biofilm formation and plant cell wall degrading enzyme production, and inhibited soft rot development on potato slices. These results demonstrated that MzmL may be a novel type of AHL lactonase with good environmental stability, and has great potential to be developed into a novel biological control agent for bacterial disease management.

Climate resilience analysis of nuclear energy by big data associated with Internet of Things (IoT)

Climate disasters are invested in the respect of non-carbon emission energy where the role of nuclear energy is analyzed by the complex algorithm. Nuclear energy is investigated by the climate variations. Artificial intelligence (AI) is used for analyzing the basic factors of the society and environment where six factors are in society and six factors are in the environment. The blockchain-based information technology (IT) is incorporated with big data for the Internet of Things (IoT) in the modeling of this study. The impact values of the Climate decrease gradually until about the 60th year and then it is stabilized. Hence, the resilience to environmental stabilization from climate disasters is achieved using nuclear energy. The impact change for Climate shows that the impact change rate increases as the impact decreases during 100 months. This study shows the climate impact decreases during 100 months of nuclear energy usage.

Robust ZTO-reinforced Ag nanowire hybrid transparent conductive thin films with absorption-enhanced electromagnetic interference shielding property

Technological advances have accelerated the pursuit of transparent conducting thin films (TCFs) with superior mechanical properties, durability, efficient optoelectrical performance and substrate compatibility as a pivotal focus in the realm of flexible transparent electronics. Against this background, this work investigates the fabrication of multilayer silver nanowire (AgNW) thin films reinforced by zinc tin oxide (ZTO) thin film encapsulation on polycarbonate substrates by a combination of sputtering and spin-coating techniques. An investigation of the influence of AgNW percolation networks on the optoelectrical properties of ZTO/AgNW/ZTO hybrid thin films was carried out. The impact of ZTO protective layers on the enhancement of electrical properties, adhesivity, flexibility and environmental stability of the multilayer TCF was elucidated. Additionally, to explore the compatibility of the fabricated TCF in integrated device and stealth applications, its electromagnetic interference shielding properties were investigated. The hybrid TCF showed 99.47% EMI shielding efficiency with an absorption-dominant EMI shielding effectiveness of 22.7 dB in the x-band region.

Multi-Interface Electromagnetic Wave Absorbing Material Based on Liquid Marble Microstructures Anchored to SEBS.

The direct application of liquid marbles in electromagnetic wave (EMW) absorption is challenging due to their poor stability, susceptibility to gravitational collapse, and shaping difficulties. To address this issue, a novel strategy is proposed to incorporate liquid marble microstructures (NaCl/nano-SiO2) encapsulated in organic phases (Octadecane) into the rubber-matrix (SEBS) using the ultrasound-assisted emulsion blending method. The resulting NaCl/SiO2/Octadecane microstructures anchored to SEBS offer a substantial solid-liquid interface consisting of NaCl solution and SiO2. When subjected to an alternating electromagnetic (EM) field, the water molecules and polysorbate within SiO2 exhibit heightened responsiveness to the EM field, and the movement of Na+ and Cl- within these microstructures leads to their accumulation at the solid-liquid interface, creating an asymmetric ion distribution. This phenomenon facilitates enhanced interfacial polarization, thereby contributing to the material's EMW absorption properties. Notably, the latex with 16wt% SEBS (E-3), exhibiting a surface morphology similar to human cell tissues, achieves complete absorption of X-band (fE=4.20GHz, RLmin=-33.87dB). Moreover, the latex demonstrates light density (0.78gcm-3) and environmental stability. This study not only highlights the predominant loss mechanism in rubber-based wave-absorbing materials but also provides valuable insights into the design of multifunctional wave-absorbing materials.

Multi-Level Switching of Spin-Torque Ferromagnetic Resonance in 2D Magnetite.

2D magnetic materials hold substantial promise in information storage and neuromorphic device applications. However, achieving a 2D material with high Curie temperature (TC), environmental stability, and multi-level magnetic states remains a challenge. This is particularly relevant for spintronic devices, which require multi-level resistance states to enhance memory density and fulfil low power consumption and multi-functionality. Here, the synthesis of 2D non-layered triangular and hexagonal magnetite (Fe3O4) nanosheets are proposed with high TC and environmental stability, and demonstrate that the ultrathin triangular nanosheets show broad antiphase boundaries (bAPBs) and sharp antiphase boundaries (sAPBs), which induce multiple spin precession modes and multi-level resistance. Conversely, the hexagonal nanosheets display slip bands with sAPBs associated with pinning effects, resulting in magnetic-field-driven spin texture reversal reminiscent of "0" and "1" switching signals. In support of the micromagnetic simulation, direct explanation is offer to the variation in multi-level resistance under a microwave field, which is ascribed to the multi-spin texture magnetization structure and the randomly distributed APBs within the material. These novel 2D magnetite nanosheets with unique spin textures and spin dynamics provide an exciting platform for constructing real multi-level storage devices catering to emerging information storage and neuromorphic computing requirements.

Electrohydrodynamic Inkjet Printing of Three-Dimensional Perovskite Nanocrystal Arrays for Full-Color Micro-LED Displays.

Perovskite nanocrystal (PeNC) arrays are showing a promising future in the next generation of micro-light-emitting-diode (micro-LED) displays due to the narrow emission linewidth and adjustable peak wavelength. Electrohydrodynamic (EHD) inkjet printing, with merits of high resolution, uniformity, versatility, and cost-effectiveness, is among the competent candidates for constructing PeNC arrays. However, the fabrication of red light-emitting CsPbBrxI(3-x) nanocrystal arrays for micro-LED displays still faces challenges, such as low brightness and poor stability. This work proposes a design for a red PeNC colloidal ink that is specialized for the EHD inkjet printing of three-dimensional PeNC arrays with enhanced luminescence and stability as well as being adaptable to both rigid and flexible substrates. Made of a mixture of PeNCs, polymer polystyrene (PS), and a nonpolar xylene solvent, the PeNC colloidal ink enables precise control of array sizes and shapes, which facilitates on-demand micropillar construction. Additionally, the inclusion of PS significantly increases the brightness and environmental stability. By adopting this ink, the EHD printer successfully fabricated full-color 3D PeNC arrays with a spatial resolution over 2500 ppi. It shows the potential of the EHD inkjet printing strategy for high-resolution and robust PeNC color conversion layers for micro-LED displays.